|
| I'm on my second DewEze, first one was electric/hyd on a parallel arms. Next one I waited until I could order a pivot bed, I put engine hyd. with remote wireless control. Hands down I would go engine drive again, if you ever feed any ton bales I would look at pivot bed. You can still feed tons off parallel arms, but if you need to fork any of it off lot easier to when bale is sideways vs. long ways.
If you want to load a lot of stuff using arms, parallel works easier. I always wanted to build a semi truck unloading chute on skids that I could just slip arms, under squeeze arms together then flip up on bed. That idea wouldn't work as easy with a pivot. I have no problem loading fuel tank slip with pivot.
I put air bags under my second truck, first one I put helper springs on. I went cheap didn't put compressor on truck, just change air with valve stems on rear of truck by my license plates. Not many dealers out here, DewEze is the closest. I would have to go to Montana to buy anything different, I mount my own here. I also think DewEze does a nice job in their wiring harness for lights, built to last a long time as they had Grote build everything quality. It met my high quality standards on wiring.
Slick way to mount those beds is to cut a piece of tubing to rest between frame and bed to give a gap, sure is easier to adjust bed that way.
DewEze old beds were heavier built, the new one is lighter but I'm sure it will be ok. Just makes me mad when they cheapen products up.
 (009.JPG)
 (001.JPG)
 (Bale Bed mounting 14' 006.JPG)
 (Bale Bed mounting 14' 007.JPG)
 (Bale Bed mounting 14' 008.JPG)
 (Bale Bed mounting 14' 005.JPG)
 (Bale Bed mounting 14' 014.JPG)
 (Bale Bed mounting 14' 010.JPG)
 (Bale Bed mounting 14' 015.JPG)
Attachments
----------------
 009.JPG (143KB - 468 downloads)
001.JPG (126KB - 455 downloads)
Bale Bed mounting 14' 006.JPG (157KB - 467 downloads)
Bale Bed mounting 14' 007.JPG (106KB - 492 downloads)
Bale Bed mounting 14' 008.JPG (97KB - 463 downloads)
Bale Bed mounting 14' 005.JPG (205KB - 459 downloads)
Bale Bed mounting 14' 014.JPG (227KB - 457 downloads)
Bale Bed mounting 14' 010.JPG (159KB - 450 downloads)
Bale Bed mounting 14' 015.JPG (117KB - 452 downloads)
| |
|
Bale beds
