|
Alberta Canada | I can't say for sure this will work in your situation but I would think it would work fine. I'm a beef operator in the great white north. I plant about 100acres of cereals for green feed and produce hay. This is on my main tractor for field work. I really like it for tillage, seeding and cutting hay because of line acquisition is far superior than EZ-Pilot. I found that with the EZ-Pilot when I engaged after turning in the headland if the wheels were not pointing in the right direction you would have to drive 10-15' before the system would recognize that and then correct. With this system it immediately turns the wheels in the right direction as soon as it is engaged. With this system you also get to use OnSwath which is better at getting the hitch on line, not the nose of the tractor. The other big advantage to me is I can stop and backup a few feet if needed (ie unplug the cutter) and it stays engaged the entire time. I am running RangePoint for a correction and I seem to be able to hold sub inch crosstrack error 95+% of the time when seeding at 4mph and cutting up to 10mph.
Hope this helps
Edited by ddk6183 12/26/2016 13:54
| |
|
Trimble FM 750 + EZ pilot autosteer options
