|
nc ks | Our 2188 won't swing the auger in or engage the unload with the key on. If you shut the key off they will work until you run out of fuel. It swings the auger out fine and all other electrical stuff seems to work fine. I know it sounds like a ground problem but I can't figure out why these two functions would be affected together. The auger engage has a solenoid of its own down on the hyd cylinder and is completely different wiring from the wires that go to the the valve stack where the auger swing is activated. I have loosened and re-tightened the post on the right rear of the cab where about 8 ground wires are attached. Any ideas would be appreciated | |
|