| The pressure control valve is inside the rockshaft housing behind that swivel fitting. DO NOT plumb any oil out of that supply line before the PCV. Put the power beyond block behind the left hand selective control valve, plumb the joystick, and do it CORRECTLY. Job done. I should add that what you have heard about plumbing on the right hand side IS POSSIBLE on 50 series and later tractors because the pressure control valve is external in a housing below the right hand battery box. WILL NOT work on 30 or 40 series.
Edited by KTA 12/9/2016 15:21
|
JD 3 function loader valve install questions for Soundguard tractors
