|
scmn | I would tee into the SCV supply line if I did not have the power-beyond block. If the SCV location in not convenient for routing your hoses, remove that line and take it to a hydraulic fabricator who makes steel lines. They can cut and flare the existing line so you can install a tee were ever you would like it. You will better off returning oil to the filter so that it gets directed back to the high pressure pump and the system runs cooler. New gen tractors had issuers with transmission pump not keeping up with front hi-pressure pump and would cavitate the pump in hi-flow situations and with clutch depressed when oil was not returned to the filter housing. This is not an issue with 30 series and newer tractors, but returning through the filter housing returns direct to hi-pressure pump with less places for generating heat in the system.
On the grapple lines, you could talk to a plumber and borrow a pipe bender and make your own. The factory lines are 3/8" pipe. Bend, cut, thread, install. | |
|
JD 3 function loader valve install questions for Soundguard tractors
