|
Eastern North Carolina | TD-18 turned 1200 at high idle, TD-20 used the same 691 cid engine turning 1550 at high idle. TD20B used the DT-429, same engine used in the 4100 and 4156 4X4 farm tractors, then the TD-20C used the V-800 V8, then on to the DT-466 in the later years. All of those tractors had somewhat weaker final drives than their Caterpillar counterpart... Keep a check on the finals.
Those 619's are known to crack a cylinder head ever so often, thus the waster tank over flow above the radiator...... Keep it full of coolant and watch for bubbles. Bubbles no good...!!!
Edited by retento 11/27/2016 14:04
| |
|
Using a TD20 Ihc dozer for tile plow? What does it weigh?
