|
West Central Iowa | I talked to Phil this morning and he gave me a couple more simple tests to do. After doing these tests he feels that the problem is most likely in the carb but he suggested trying an adjustable flow outlet fitting for the demand regulator. Here is a link to this part.
https://carbturbo.com/product/33-ea-fitting/
While this may not be a "by the book" repair, I think it makes the most sense to try this next. My only concern with this fix is if the mixture will be close enough at all loads. The tech person at this supplier said this fitting is made for this purpose and felt it would be fine.
I will report back once I get this fitting installed and do some test runs.
Thanks!
Edited by pirlbeck 11/21/2016 13:50
| |
|
Propane generator running rich??
