|
West Point, IL | got a bid today to put insulation and metal in my shop/morton building. They are going to put 2x6's every 3 foot horizontal on the side walls. 6'' blow in insulation on the walls and then cover with 26 guage metal. The ceiling will get 2x6 perlins between the truses to screw metal to for added strength. then 16" of insulation and metal on the celing. Buiding is 45x72 they would also install 2 vents on the outside to help the attic breath. the cost of those are reasonable. they are also going to put 3 inch foam with a white pvc front on my two existing sliding doors. Just for fun guys, try to guess what the total bid was? this is an existing building that i have with 9 foot centers on the posts and rafters. one 22 foot door and a 15 foot door on the side. | |
|
insulating and metal for inside of building
