AgTalk Home
AgTalk Home
Search Forums | Classifieds (178) | Skins | Language
You are logged in as a guest. ( logon | register )

Pull Type Combines
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Jon Hagen
Posted 11/2/2016 20:40 (#5614814 - in reply to #5613562)
Subject: RE: Pull Type Combines



Hagen Brothers farms,Goodrich ND
Big Ben - 11/2/2016 09:15

DanR - 11/1/2016 21:42

Neighbours ran 914 IHCs (an ok machine, a few character flaws, but no worse than anything else), JD 7721 (often referred to as part of the 'long green line', in reference to the volunteer grain in swaths the year after a harvest.....but I'd argue that was more about operator than machine). And there were a few 1482s around. In those days, few people had a primary tractor with PTO and powershift, so the rotaries got a bad reputation early on, as they were less forgiving of inconsistent feeding. We have plenty of rolling hills, and the volume of crop through the combine can change a lot between the low spots and the hill tops. The walker machines seemed to work more consistently in those conditions - the rotaries tended to throw over some grain if overloaded or underloaded, so that was a gear-grinding exercise to be shifting all the time....

danr


They came on to the scene a little too late, but CVT/IVT transmissions were the best thing that ever happened to PT combines.




That's where we loved our old 1950T and 2150 Olivers with over & under hydropower on the PT combines. With the 6 speed trans and 3 speed over / direct/ under hydropower, you had 3 shift on the fly gears in each transmission gear, for 18 speeds total. They would get you from the poor yielding dry hilltops ,across the high yielding low spots without over / under loading either combine or tractor. The best thing next to a modern IVT.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)