Posted 10/10/2016 06:24 (#5573429 - in reply to #5572444) Subject: RE: what hp motor for electric auger
SW Ohio
We run two 8"x47' at about the same angle as one in picture in dry corn and beans, get up to 2200 bph with a five hp single phase on each, screw speed is between 375 and 425 rpm. I would try the 1.5 and see what you can get, the gas motor would be harder to mount unless it already has the disengage feature. Either way it is going to be slow with a worn 6".
what hp motor for electric auger
