|
| I'll answer what I can.
If it needs a case drain, it will need 3 hoses that all connect to different places on the tractor.
If it has case drain, it is a 3rd zero (minimum) restriction return that goes to the sump.
A motor return is different. They use the flat face coupler as a way of not confusing them with the other hoses in the system. I think.
If it requires a case drain connection, you can get just the end from your vendor of choice. Just put the end on the hose. Do NOT just use an adapter. Bad carma and hoses will get switched eventually.
Don't tee the motor return and the case drains together either. The motor return fluid can over pressurize the case drain at the motor and blow the seal.
Motor return goes to the scv or motor return port if your tractor has one.
Case drain goes to the case drain. | |
|
Hydraulic Case Drain - John Deere 7210
