|
| Adding Vset to a planter and a bit confused on how to hookup the case drain. None of the hydraulic hoses came with the blower and I see that the case drain coupler is different than a regular, pioneer or equivalent coupler. Do I need to buy a special hose w/ the coupler or is there an adapter?
Secondly, in the planter setup manual it shows the case drain connection kit that one would need to buy to attach a case drain hose (see below). In the planter operator manual it shows an 8000 series coupler and in the tractor manual it shows a low-pressure return circuit as well as the hydraulic motor return.
I guess my question is - is there anyway to make this work without buying a kit from Deere? If not, do I order the BA30218 kit or is that the wrong part #? Lastly, where do I get the coupler that goes on the case drain hose and attaches to the tractor or is there any way I can use a regular hose? TIA
 (IMG_20160917_173119636.jpg)
 (IMG_20160917_173138646.jpg)
 (IMG_20160917_173147557.jpg)
 (IMG_20160917_173301816.jpg)
Attachments
----------------
 IMG_20160917_173119636.jpg (232KB - 720 downloads)
IMG_20160917_173138646.jpg (148KB - 688 downloads)
IMG_20160917_173147557.jpg (209KB - 687 downloads)
IMG_20160917_173301816.jpg (224KB - 707 downloads)
| |
|
Hydraulic Case Drain - John Deere 7210
