|
rochester IN | If you have only one hose we always use the reel up down circuit ours is a 07. You don't have to have the elec. box for them to move. We had the same problem with them not moving until we put some extra return springs under the head. They claim it has one inside the cyclinder and it must but not strong enough. The other thing we done is we welded rods on the deck plate that moves to make the plates close narrower for popcorn witch made the actual plate be out farther wich allows less dirt and grime to acumulate. Great head once you figure out its corks
The rods are available through the parts department.
Edited by Vigarfarms 9/4/2016 08:21
| |
|
Geringhoff Rota Disc Hydraulic Deck Plate Questions
