|
Redickville, Ont | From what I can measure I'm pretty sure it will work. Also manual say you can but says something about axle and frame extensions. I know you need to lengthen the axle which is just pto shaft I did mine 80" when we move it to 108" wasn't a big deal but not sure what the frame extension are. I wonder if that is for 120". I'll look tomorrow in the parts manual see if it shows anything. If it's Hyd slide or manual slide you can always try moving it out see if got enough slide before you buy it. It not hard to move the rear ones especially the Hyd one just need to move the stop. Every hole front axle moves it 4" so one will line up. We love ours. Had one since 95 and bought second one for spare and nice not to have to do so much cleaning when your trying to spray grain and spuds at same time in spring and same when where using fungicide and killing potatoes in fall. The motor is gutless lol but you get use to it. If your switching motors because power we just switched injection system on 80" to a Bosch and I think it has double power now. Just needs two steel axle now and I could fly up road. You can put 400 gal tank on but if your in hills I've herd guys standing them up. You can't see out back then but can't see much anyways. We have pulled ours. Hard to hook up but if you modified hitch so it had slide like wagon would fix that problem. What we did is put hitch on sprayer to tow 1000 gal nurse tank. I like that much better than dump truck. You can set right out onto the wagon. Local coop pulled there all time hit you need right tires or you'll melt them off. We spray 200 at spuds every 6-10 days depending on if weather is good. You can do it in a day if things work out good. One thing I'll suggest they don't turn good. On 72" machine we got pieces made to make it turn tighter. You don't special ones if your wider cause they don't hit. You just need to drill hole in plate I think a inch back to make it turn. Forgot to take picture of it I have it sitting beside the drill press cause it's driving me nuts not being able to turn. Have anymore questions just ask.
Edited by CMA 9/1/2016 22:06
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
Attachments
----------------
 image.jpeg (108KB - 420 downloads)
image.jpeg (88KB - 419 downloads)
image.jpeg (110KB - 464 downloads)
| |
|
3630 spra coupe
