south east SD | Grhog - 8/10/2016 22:02
Well that may be the right way but shifting into gear with auger full on grain cart in either forward or reverse must be very hard on poor old cart. Especially with RPM's high.
RPM's are up, above 1500. But it doesn't slam into gear, you slip it in and out fairly fast. There is no bang at the hitch pin when going one direction. Once you get the hang of it, it's not bad at all. The cart is a 1000 bushel J&M. We can fill a semi on one trip, better when we do half. Less weight on the cart across the field. Like anything practice make better!! |
Use clutch or not? JD 8100
