|
Statesville, NC | I looked into the oversize bushing kits from s.i. dist, but you have to drill the parallel arms to 1 3/32" and the arm is only 1 1/2" wide, which leaves less than 1/4" of material on each side of the hole. Also, some of the holes are not exactly centered (not worn that much, just off in manufacturing) and they would be very thin on one side of the hole. From what I read, the 7200 planters have the larger bushings standard. I guess they have wider arms too? | |
|
Planter Bushings/Bolts AGAIN
