|
Morris, IL | Honestly it's not anywhere. 3/8" is floating in there but it doesn't move as going through the Y it is kept from moving, just it's a tight turn for it. The 1/2 is a tight fit, the 3/4" ID and the 1/2" OD is about the same, i've ran few acres and never lost a hose. But i have since cut the 3/4" and put hose clamp and can no longer be pulled out without loosening. That isn't pictured.
Anytime Jeff, 3.5miles straight north seneca I80 exit. | |
|
- TY Drops, my version of homemade Y drops - NEILFarmer : 7/10/2016 17:25
- RE: TY Drops, my version of homemade Y drops - steve c-il : 7/10/2016 19:45
- RE: TY Drops, my version of homemade Y drops - johnny skeptical : 7/10/2016 19:48
- RE: TY Drops, my version of homemade Y drops - mudracer : 7/10/2016 19:56
- RE: TY Drops, my version of homemade Y drops - LNS8310 : 7/10/2016 20:47
- RE: TY Drops, my version of homemade Y drops - jdg : 7/10/2016 21:31
- RE: TY Drops, my version of homemade Y drops - frytownfarmer : 7/10/2016 23:50
- RE: TY Drops, my version of homemade Y drops - Jdgrainfarmer : 7/11/2016 00:30
- RE: TY Drops, my version of homemade Y drops - wade garrett : 7/11/2016 05:28
- RE: TY Drops, my version of homemade Y drops - 1770 : 7/11/2016 05:54
- RE: TY Drops, my version of homemade Y drops - AVP_Matt : 7/11/2016 10:22
- RE: TY Drops, my version of homemade Y drops - jd6000 : 6/14/2017 10:35
- RE: TY Drops, my version of homemade Y drops - Dakota Doc : 6/20/2017 23:30
- RE: TY Drops, my version of homemade Y drops - Jdgrainfarmer : 2/28/2019 23:27
- RE: TY Drops, my version of homemade Y drops - Jdgrainfarmer : 3/1/2019 00:25
|