|
Saronville NE | I worked at a feedyard for a couple yrs before coming home to farm, we built our own like yr talking and put it on a 8050 fwa, that had a ezeeon ldr, mainly used to push wet corn, but did push slop in the feedlot with it also. I think the dozer was an old otter blade off a 4010, we just cut all the excess off and welded the quik tatch ldr mountings right to it, and were good to go, know you really had to watch what you did with it cuase you could really see alot of movement in the ldr frame up front when pushing. We left it manual angle, and we did have joystick control, which was way nicer than using the old hyd handles. Just be careful what you use it for and you should be ok. | |
|
dozer blade on tractor front end loader
