Posted 12/17/2008 08:11 (#537265 - in reply to #537245) Subject: Re: Planter Parallel Arm Bushings
KS
When I did mine, I used the floor jack under the discs to hold up the unit. Then you can kind of balance it on the jack and get everything lined up for reassembly. Don't take all 4 out at once or it can fall off the jack. Ditto on the impact wrench as the nuts are self locking. You will/should need to replace the bolts as the bushing rides on the thread portion and wears out the diameter of the bolt.
Planter Parallel Arm Bushings
