|
canada | I cut the last filter open and this one. No filings, the filter paper is grayish but no flakes of clutch material or metal. I assume I'm looking for the same product as an automatic transmisison pan? Put a new filter on it and ordered a sending unit. I'm going to get it home and park it until I can change the sending unit and hopefully figure out how to test the old one. In the wiring schematic in the operators manual it looks like it needs 100 psi backpressure to trip the valve so I should be able to test it with air...
Thanks for the help
Edited by ronski 6/20/2016 21:12
| |
|
funk powershift problem 6175 white
