Posted 5/22/2016 22:22 (#5315428 - in reply to #5313750) Subject: RE: JD 4830 Fault Code - ECU 636.10
Nemaha County
Fought this on a lot of 6.8 engines. After changing out wiring harnesses, sensors, controllers and anything else we could think of. We measured the sensor depth from the tone wheel to the end of the sensor. It needs to be within 1mm-1.5mm away from the tone wheel. Most of the sensors that are replaced are too far away from the wheel.
JD 4830 Fault Code - ECU 636.10
