|
Stoddard Co. SEMO | I ran my 9020B excavator for about 8hrs today and several times the digital display alarm went off for over heating hydraulics. I'd quit working it, check around the excavator for something out of the ordinary, let it sit while running and in about 10 minuits and it would be cooled down. It did it again about an hour later and I repeated the procedure. It seems to do it while I'm tracking the excavator more than just digging with it. When tracking, it has fast, standard, and slow speeds, I tend to always track in standard. When I dig, I usually run it in heavy mode but at 80% throttle. | |
|
Case 9020B Excavator Hydraulics Getting Hot
