North Liberty and South Bend, Indiana | This switch can be wired either NO or NC. I have it NC, when the planter is up and row units are hanging down switch contacts screw. My monitor (agleader pf3000) shuts the mapping off with a closed circuit. Put planter down and parallel arms move so switch leaves contact screw, opens circuit and mapping comes on. On this monitor the two wires needed to do this are in the harness going into master connection. It all depends on how your monitor is setup to activate mapping. Could easily use these switches to power pumps, lights ,etc via relays or solenoids. |
My El-cheapo implement switch
