|
| Three Smartrax with the Raven Lightbars. Two with 132 Trimbles, 1 with a 332. All are on Beacon correction, the oldest 132 was purchased in 1998. The 132 is still a very good receiver, the 332 is better, but not a lot. We have 2 Raven 210's that take up space on the shelf, they are not in the same accuracy league as the old 132's. The lightbar has patterns (this might have changed, I have not been keeping up on this) that are not available in either the Viper or Envisio. I did upgrade the control boxes when Raven had a replacement program, but kept the old valves. This is not the best combination and takes some tweaking to work. This is a floater application, not row crop, and works well, even above 20 mph. | |
|
Hooking up an ITC receiver to a Smart trax system
