40DODGE - 3/20/2016 18:48 Also make sure your 7-pin trailer style electrical hook up has power to it. That is what powers the controllers on the planter. The monitor would give a bunch of red box errors on start up if the planter MCU/ECU wernt powered if that was the case. Delt with that the first year I had my 1200 planter. Turned out the main fuses behind the cab were corroded. Since I replaced those I havent had an issue. On the MCU/ECU on the planter there are 2 LED lights. If they are lit up green they are getting power. I would check and make sure everything software/firmware is updated on the tractor, NavII, GPS, and planter. The newest is v31. I had v28 on my tractor (225 Magnum)/planter/GPS last season with no issues.
|