|
NE CO | I imagine you've post calibrated all you yield data? I've seen this before as well and happens exactly when you try to make an Rx off a post calibrated yield map. Map and zones show up just fine, but the acres seem to double in some cases for some reason. A customer of mine had the exact same issue so I took their Rx's, put them into SMS, and got the correct data for the acres in each zone. You can to try copy the yield data to a bogus field, then undo the post calibration information, then using the real Rx as a reference try to match up the zones the best you can by modifying the legend to match, then that should give you the right acres as well. | |
|
APEX Rx Maps Not Matching Yield Maps
