|
Montevideo,Minnesota | You can't wrong with one of them. I wouldn't trade my for any other ripper out there. There is alot of around here. I have plugged it before, but that was where there was some longer stalks and there were also damp so that don't help matters any.
There is 24' and 30' shank spacing that is made. There is alot of both around here.
Also put a 3 bar drag on the back. That makes alot of difference
Edited by Golden Farms 2/2/2009 23:17
| |
|
John Deere 2700 Disc Ripper
