Posted 2/18/2016 14:15 (#5120490 - in reply to #5120269) Subject: RE: John Deere 7000 planter advice
Hallsboro NC
Another thing to think of is what row spacing you want. unless its a conservation (7x7 bar with independent cylinders on each wheel to raise and lower) 36" is as close as you are going to get. you can do some cutting and welding to go to 30" if you want to, that is what I did and it works great. Excellent planters most any part can be ordered from shoup, a lot cheaper than from deere.
John Deere 7000 planter advice
