|
Northeastern Pa. | I am not sure where you are located but in this area here is what I look for. Cracks on the seed unit assy. above the depth wheels on both sides. Cracked closing/tail wheel assy. Broken closing wheel tension spring. Unit down forces springs. With the planter raised lift up on the seed units. Should be fairly tight and no side to side movement. Open hoppers and make sure there is no left over seed as this causes seed backing plate rust. Seed opener disks no less than 14.5 inches. Wheel bearings. Then the normal wear items like drive bearings and chains. If you buy one the operators manual is your best friend. | |
|
John Deere 7000 planter advice
