North Central, South Dakota | APF - 2/14/2016 09:02
Thanks
Wanting to hydraulic steer so it looks like I can't mix and match stuff. Would have liked to use a 262 or 372 and NavII to steer things using an integra.
Or at least a 262 or 372 for signal and pipe it in to a steer command and integra.
Can't give steer command a signal from a trimble won't work you can do that with a on trac 3 i believe though. I use to do it with a on trac 2+ and a 252 with rtk. On the nav2 would be your source of gps signal not 100% sure if it's tilt corrected data though usually it's not a big deal unless you have some good side hills. |
Feeding an integra
