|
Central, WI | +1 in the Red Seat! It's a great option you will regret not getting if you ever used one before. Go with the lower houred one if your budget allows and if you can also verify maintenance between the 2 are similar. If your not sure, get oil samples done. I've seen some 330's and 335's with heavy abuse need tranny repairs around 2500hours but ones with good maintenance and pure Ag use with no issues at 5500 hours. Some guys swap out a complete scrapper drawbar for an Ag drawbar before selling and this can be deceiving. How deep and what size are you planning to run tile with it? If you are running deeper runs look at getting a tile chip or you will have issue with it kicking out of gear on hard pulls, about $2500. One with good documented services is your best bet if they look similar otherwise. Make sure you have the procedures to re-calibrate these transmissions when they start shifting harder. Good Luck!
Edited by Farmer8920 1/21/2016 19:29
| |
|