| PatCMO - 1/16/2016 13:58
This also frustrates me. I have been keeping the nozzles from empty cans lately. Have gotten some Rustoleum lately that will still spray paint upside down. Not sure how they accomplished this, but it makes it impossible to clean out the nozzle on a partial can. On those cans I have resorted to taking the nozzle off and blowing air through it with a blowgun. Patrick
I agree, I like the spray any any angle(I assume they work similar to gas feed on a chain saw)
BUT, if you don't use the whole can, many times it's a one use, and done. I have been returning them if they are half full or better.
I figure that is the best way to get the mfg attention. |
Paint spray can nozzles??
