|
| So here is my problem,
i have a cm 360 steiger with a 3406B model cat 360hp. It died, spun two rod and a main bearing. I don;t ant to have the block redone because the local machine shops are kind iffy around here anymore.
So I found a 310 economy Cat out of a truck ran strong good oil pressure. SO my questions is can I use this motor just through it up in there and put my pump on it and my injectors and turbo and run it?
Or should I just use the bottom end and reuse all the parts off my old engine, (head, turbo,cam pump. etc. )
This is an old tractor don;t really want to go through a 10,000 dollar rebuild if i don't have to. I might not have a choice.
Also is there a way to check to see what the differences are in the two motors, the tag on the 310 motor is pretty well gone can't even get the whole serial number i just know it is a 92 .
Any help would be greatly appreciated
| |
|
Steiger CM 360, Cat 3406 died
