|
SW Minnesota | Here's the mount I made for mine. It's the frame you see mounted about halfway down the uprights with the hitch receiver tube welded to it. The long angle irons are about 1/4" thick steel.
The winch is mounted on a heavy plate with a receiver hitch welded to the underside of the plate. That way I can use the winch for other applications and if I don't need the winch (which is 80% of the time) I can remove it so it isn't out in the rain, snow, road salt, etc.
Edited by jd-tom 12/29/2015 20:04
 (25-foot PJ trailer #6.jpg)
Attachments
----------------
 25-foot PJ trailer #6.jpg (93KB - 285 downloads)
| |
|
Electric Winch on a Gooseneck trailer
