|
BC, Canada | On our Big Tex there is a 2x4 cross member between the uprights. I want to weld a piece of channel flat side up on top on the 2x4 member. Bolt the winch to that. And if needed add a few triangle gussets from the bottom of the channel to the x member. The winch is on the front of my truck right now.
Edited by Billyfox 12/28/2015 15:40
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
Attachments
----------------
 image.jpeg (130KB - 286 downloads)
image.jpeg (133KB - 269 downloads)
image.jpeg (138KB - 302 downloads)
| |
|
Electric Winch on a Gooseneck trailer
