|
EC Indiana | Several options. The white 61 (6175,6145)series will have cummins and a funk power shift. The Agco allis 96 and 97 series will have a Penske engine(I think) and funk powershift. The Agco dt series will be cummins and funk. The DT A's will be sisu and cvt. I forget the Massey numbers that are equivalent. 8400 series I think. Then Agco DT B's will be sisu and cvt. Massey 8600 series is equivalent. Then of course there is challenger but I won't attempt to discuss them.
You can also get a large small frame in a Massey or Agco. The Agco is an RT series (RT 155, RT 180, etc). These are rare. Massey has several large small frames. They Both can have cvt, or partial auto powershift. Sisu engines in later ones and cummins in earlier and something else in early masseys.
Confused enough yet?
From newest most expensive to older and less expensive:
Large frame, fwa, sisu, cvt:
Massey 8650
dt 205b
dt 180a- dt 220a
Massey equivalent
Large frame, fwa, cummins, PS
dt 160- dt225
Massey equivalent
Large small frame, fwa or 2wd, cummins or sisu, PS cvt or auto 4 or 6 (partial PS)
Agco rt's
Massey 7000 series
Then
Agco 96-9700 and white 6100 series. Which could be fwa or 2wd, powershift and Penske or cummins powered.
Keep us posted with questions. Look on tractor house and tractordata.com to help you figure out the different ones.
Good luck. | |
|
Advice on Agco tractors
