Posted 10/23/2008 12:49 (#489025 - in reply to #489003) Subject: RE: powering a grain cart with hydralics
The most flow you will get out of one standard couplers on the tractor is about 30 GPM, give or take 2 GPM depending on the interal design of the valve, and that is under ideal conditions. The pumps are rated so much higher so you can get high flow at multiple couplers, but no more than 30 trough a single couple So if you need more than 30 GPM you have to hook into the power beyond with 3/4 couplers and 3/4 lines.
powering a grain cart with hydralics
