|
| Make sure that the sensor in the clean grain elevator has the correct clearance and that you have calibrated the moisture sensor first. Also need to do a vibration calibration before running yield calibrations. Then have to calibrate at different speeds in crop to get different flow rates as the data forms a curve and not a straight linear relationship. The more you do, the more accurate it will be. Need to repeat this proceedure for each crop type. Then just one check per year after that should be enough.
If you are going to use autoswath, make sure it is unlocked first, as I put it in part way through the season and for some reason it totally threw everything out.
Good luck ! | |
|