|
KY | I personally would either build a set up to support that drawbar like is shown in the pics above or just go for the HD drawbar, which ever you feel more comfortable with.
As far as the drawbar setting I am assuming the cart is a 1000 Rpm shaft so you will need to set the drawbar at 16" from end of pto shaft to center of hitch pin hole to keep the driveline from potentially bottoming out and causing damage.
Now for the sloppy hole, get the largest hitch pin that the drawbar/ hammer strap will accept and then have a machine shop make you a bushing for the grain cart hitch to take out the slop. The way it is now will be extremely harsh and would probably break something if you were loaded and it got to jerking real bad. | |
|
Grain Cart hitch questions (with picture)
