| a4t-1600 - 8/29/2015 22:53
They just look like they are running level if it takes the fronts that much faster than the rears unless you are discing pasture or other hard soils. My dad used to scold me severely when I had to much pressure on the front gangs so it would pull easier because the rears were running out of the ground almost . There might of been a 1/2 maximum difference when the blades were done . It was a krause then the same way with his old miller and then the last one was a sunflower.
To clarify, I was referring to primary tillage on firm soils. For finishing work disk wear front to back will be much more even.:) |
Advice on replacing disk blades ( front or rear )
