roaming | Noble1 - 8/21/2015 10:01
What would it take to put apro 600 in a 2388 that has a universal plus display?
Do you have to swap out any sensors or modules?
There is an update kit 87664044 that includes an adapter harness and a mounting bracket. Takes about an hour to install. That's it. You could technically get by without the mounting bracket, but it's a tight fit.
Depending on the version of software in your UD+, there is a very small chance that you might need to have the software in your YMIU updated to be compatible with a Pro 600. But that's unlikely. The YMIU probably already has 2.2 installed, which is fine for both the Pro 600 and most UD+ firmware. |
Pro 600 in 2388
