Iowa Falls, IA and Sauk Centre, MN | The OnTrac that you're talking about, (if it is an Ag Leader OnTrac2 original or OnTrac2+ that you're actually referring to) is proprietary to an Ag Leader display. That is to say that you need it to be an Ag Leader Integra, Versa or Edge to run the OnTrac2 original system. If you have an OnTrac2+, then you need the Ag Leader Integra, Versa or Compass to run that. NOTE: Edge and OnTrac2+ do not work together, as the Compass and OnTrac2 original will not work together.
You can however use the JD Starfire 3000 as your GPS receiver along with a harness from Deere to send GPS into the Ag Leader display, needing an Ag Leader 2000819 Null Modem cable to connect the display 9 pin GPS serial connector to the Deere Starfire 3000 side. |