|
Somewhereville, Earth | knvernland makes the tines most common here in NZ, they are imported from europe, the sockets that the tines fit into a made locally, but i am sure a ag parts store should be able to get em
my opinion at least two tines, thin, and high tensile knvernland ones work great for spearing high density bales, and pull out easy because they are taper all the way up the tine
the can work loose in the socket if abused, they have a location tab to stop them turning in the socket, they work fine if you keep them tight, usually when you break one you end up gas axing the nut off to get the tine out of the socket
| |
|
Questions about Bale spears.....one design better than another?
