Viewing a thread - Can you still buy "old" T-posts?

You are logged in as a guest. ( logon | register )

Can you still buy "old" T-posts?	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

paul the original

Posted 9/17/2008 12:08 (#462669 - in reply to #462551)
Subject: Re: Can you still buy "old" T-posts?

southern MN

Watched the same show. Think the roller was in the Chicago area? Just heated & rolled those rail down to Tee posts.

The last some I got from TSC the tops would chip off during pounding.

Dad had angle iron posts - oblong holes down one side to wire the wire on. 100 or so are out there.

--->Paul

Can you still buy "old" T-posts? - Tyler WI : 9/16/2008 20:24
- RE: Can you still buy "old" T-posts? - Hay Hud Ohio : 9/16/2008 20:47
- 1.33 lb/ft vs 1.24 lb/ft - John SD : 9/16/2008 21:54
  - RE: 1.33 lb/ft vs 1.24 lb/ft - Chad H : 9/17/2008 01:26
- RE: Tyler, If you find some - Paul(WI) : 9/16/2008 22:56
- What I wish you could still buy....... - Rich : 9/17/2008 01:17
  - RE: What I wish you could still buy....... - Roy@ranch : 9/17/2008 07:32
    - Roy, Dad bought a bunch of "seconds" one time... - John SD : 9/17/2008 07:44
      - Re: Can you still buy "old" T-posts? - Greywolf : 9/17/2008 08:55
        
        They are a little off on "All"........ - Rich : 9/17/2008 11:59
        Re: Can you still buy "old" T-posts? - paul the original : 9/17/2008 12:08
        
        Re: Can you still buy "old" T-posts? - Rich : 9/17/2008 12:25
        
        Have you guys ever seeen Colorado Silver Tips??? - John SD : 9/17/2008 21:20
    - RE: Pic - T and U notched ~ - iseedit : 9/17/2008 09:05
      - Ripples - EMTfarmer : 9/17/2008 09:28
      - RE: Pic - T and U notched ~ - Rich : 9/17/2008 12:01
      - got quite a few T-type and a few U-type here..... - John SD : 9/17/2008 21:31

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)