|
SW Indiana | Here is some pictures of mine. If you go some route like this I don't know if I would invest in a building to put it in. Like I said this was built in the 80's never been inside, I bought it from the original owner. When I got it there was a small amount beginning to rust, I wire brushed it and bought some instant cold galvanized in spray cans at the hardware store and touched it up, but that had never been done before. As you can see, couple more places that need it now on the top. I was very fortunate to have the bin, and wet tank already there. But if your thinking expansion in the future my opinion is you eventually want to go some sort of drier and not with the bin driers. I know there is a lot of corn dried in them even today, these are a lot more efficient and I don't miss the days of working on stirators. Dad had a pto dryer like the one pictured above, it worked but someone was basically with it at every moment it was drying.
 (NCM_0667.JPG)
 (NCM_0668.jpg)
 (NCM_0669.jpg)
 (NCM_0670.jpg)
 (NCM_0671.jpg)
Attachments
----------------
 NCM_0667.JPG (75KB - 422 downloads)
NCM_0668.jpg (70KB - 437 downloads)
NCM_0669.jpg (104KB - 485 downloads)
NCM_0670.jpg (71KB - 452 downloads)
NCM_0671.jpg (85KB - 429 downloads)
| |
|
Educate me on small grain dryers.
