AgTalk Home
AgTalk Home
Search Forums | Classifieds (42) | Skins | Language
You are logged in as a guest. ( logon | register )

6410 fuel issues
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
seedcleaner
Posted 5/28/2015 07:45 (#4595316 - in reply to #4595285)
Subject: RE: 6410 fuel issues


Mid-Missouri
Does it run bad idling in the driveway or only when pulling a big load?

If it runs poorly in the driveway, hook up a fuel line to the injection pump with a quart bottle full of fuel. Squeeze the bottle for pressure while it is running a see what you have.

You could maybe google the injection pump model number for some common specs such as what inlet fuel pressure it requires, etc..., or call a local good pump shop...you might need them after diagnosing...but I doubt it.

I do not believe there should ever be pressure in the fuel tank, especially if it has a vented cap, unless it was a one-way vented cap. Find out where the pressure source is coming from. The only way I am familiar with that is filling it full, and temperature/sun heat cause the pressure.

Don't thread the cap on crooked. I know some tanks have been replaced because of difficulty getting the cap on properly. It should likely have a flat o-ring in the cap for sealing the tank.



Edited by seedcleaner 5/28/2015 07:50
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)