|
Minnesota | We had a MT3000 for a long time and now have a Spraymate2 that we still use.
The actual mechanical parts of the flowmeter are interchangeable. At most, you would need a new flow cable that has the green sensor and the correct plug. They aren't very expensive and do occasionally fail (I think I have replaced two of them in the 15 years or so of using MicroTrak controls). You may be able to cut off the the weatherpak plug and swap it with the correct style.
Looks like FlowMate is not a rate controller like the 3000. So it might not matter, but I think the control valve from the MT3000 operated at a different voltage the the newer style. I think that with the Spraymate we could select if we had an old or new style valve. | |
|
Micro-Trak parts
