|
Kentucky | If your dealer is close, the Hardi parts are as follows.
You will remove the plug, but save the nut. There is a piece that has an o-ring seal to insert and male threads which allows a Hardi quarter turn valve to connect. The valve is female threads on one end and male threads on the other which then allows a 45 degree piece that a nozzle cap screws on to hold a Hardi end row nozzle.
http://en.calameo.com/read/000633029d8cba653f138
Page 27 has fence row nozzles.
You may want to move the foam marker bracket farther out the boom to keep from hanging it on nozzle in a break away situation.
Edited by Jmark71 5/25/2015 22:08
| |
|