Near Intersection of I-35 & I-90 Southern Mn. | The connections in the first picture are what Raven used at first and can still be used with a 440. The small round connector goes to the flow meter.
The connector in the second picture is what is used with a 440 or 450. It has all the wires in the large AMP connector. You can buy a new harness for the tractor. L&D makes the adapter you asked about. Your old console cable would need to have a constant power wire added to it. Going with a new cable is probably best as it will have all the connections in the correct places.
The second post shows the 085 cable. One end goes to the 440 and the other end goes to the NH3 bar. The two pole connector is a switched power source that could be used for a variety of tasks. The speed cable is completely separate and goes from the speed device to a small round connector on the back of the 440. The speed information does not come through the console cable whether it is the old style that you have or the 085 pictured.
Edited by tedbear 4/25/2015 16:56
|
raven cold flow connections
