Viewing a thread - Anybody have or know of a good square baler troubleshooting guide

You are logged in as a guest. ( logon | register )

Anybody have or know of a good square baler troubleshooting guide	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Russ SCPA

Posted 9/6/2008 20:58 (#453510 - in reply to #453476)
Subject: RE: Anybody have or know of a good square baler troubleshooting guide

SCPA

It has been a long time since I fought with NH knotters, but with the inconsistancy, I would look first at twine. Pinches and swells in the twine thickness can just drive knotters "wacko". I finally went to using plastic twine simply to preserve my sanity. My fight was with a New Holland 315, comments may or may not apply.

Anybody have or know of a good square baler troubleshooting guide - JoshuaGA : 9/6/2008 20:16
- Re: Anybody have or know of a good square baler troubleshooting guide - BCFENCE : 9/6/2008 20:52
- RE: Anybody have or know of a good square baler troubleshooting guide - Russ SCPA : 9/6/2008 20:58
  - Re: Anybody have or know of a good square baler troubleshooting guide - raider2b : 9/6/2008 21:17
  - RE: Anybody have or know of a good square baler troubleshooting guide - feelnrite : 9/6/2008 21:31
- Re: Anybody have or know of a good square baler troubleshooting guide - sricks : 9/6/2008 21:33
- RE: Anybody have or know of a good square baler troubleshooting guide - Von WC Ohio : 9/6/2008 21:36
  - RE: Anybody have or know of a good square baler troubleshooting guide - JoshuaGA : 9/6/2008 22:11
    - RE: It'll make bales and tie knots,, just needs fine tuning,, - 95h : 9/6/2008 23:08
      - RE: It'll make bales and tie knots,, just needs fine tuning,, - WYDave : 9/7/2008 00:03
        
        Freeman's are like pet dogs, everybody's got at least 1.. - 95h : 9/7/2008 01:01
        
        RE: Freeman's are like pet dogs, everybody's got at least 1.. - WYDave : 9/7/2008 07:23
        
        RE: Freeman's are like pet dogs, everybody's got at least 1.. - Jay in WA : 9/7/2008 09:42
        
        Jay in WA - Ben D, N CA : 9/7/2008 17:00
        
        RE: Jay in WA - Jay in WA : 9/7/2008 18:35
        
        Actually there is a market for the JD baler.. - 95h : 9/7/2008 10:04
        
        RE: Actually there is a market for the JD baler.. - Jeff Outwest : 9/7/2008 10:55
        RE: Actually there is a market for the JD baler.. - JoshuaGA : 9/7/2008 11:18
        
        speaking of "inline" balers..... - 95h : 9/7/2008 11:45
        
        RE: speaking of "inline" balers..... - WYDave : 9/7/2008 13:53
        RE: The old balers - Redman : 9/7/2008 17:01
- RE: Anybody have or know of a good square baler troubleshooting guide - School Of Hard Knock : 9/6/2008 22:38
- RE: Try this,, - 95h : 9/6/2008 22:54
  - RE: Try this,, - School Of Hard Knock : 9/6/2008 23:49
    - RE: Try this,, - WYDave : 9/6/2008 23:59
- Finding causes of cut strings - WYDave : 9/7/2008 00:07
- Re: Anybody have or know of a good square baler troubleshooting guide - kfarm_EC_IL : 9/7/2008 01:19
- RE: Anybody have or know of a good square baler troubleshooting guide - RickB : 9/7/2008 08:35

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)